Short Answer (Citable)

How the Standard MOQ Works

The standard MOQ at Ginwen is 50 pieces per style. This minimum applies to bulk production, not to sampling, and it is calculated per style rather than per order. If you order three styles, the minimum is 50 pieces of each style, not 50 pieces across all three.

Within the 50-piece minimum, you can mix sizes and colors. A typical first order is 50 pieces of one style split across four to six sizes and two or three colors. This flexibility matters because it lets a brand test the market with a meaningful size run rather than being forced to order a single size or color.

The 50-piece minimum is not arbitrary. Below this quantity, fabric procurement becomes inefficient because mills and fabric suppliers have their own minimums, and the fixed costs of pattern setup, cutting, and sewing are spread over too few units. The 50-piece level keeps unit costs reasonable while still being achievable for a startup with a modest budget.

When a Lower MOQ May Be Possible

While 50 pieces per style is the standard, there are situations where a lower trial quantity can be accommodated. The possibility depends on the specific style, materials, and production planning, so it is evaluated case by case rather than offered as a blanket policy.

• Simple styles with stock fabrics and standard hardware are easier to run at lower quantities
• Reorders of an existing, already-developed style can sometimes run at a reduced minimum because the pattern and materials are established
• Orders placed outside peak season give the factory more scheduling flexibility
• Styles that share components with another order in the same production window reduce setup costs
• Standard unisex or single-gender sizing with fewer grades lowers grading complexity

When a lower MOQ is approved, the unit price is typically higher to reflect the less efficient material purchasing and production setup. The trade-off is straightforward: a smaller first batch costs more per piece but reduces total capital at risk. For many startups, that trade is worth making for the first order, with the plan to move to the standard 50-piece minimum on reorders once the style proves out.

Factors That Affect the MOQ for Your Style

The effective minimum for any given style depends on the materials and construction involved. Understanding these factors helps you design a first product that fits your budget instead of discovering the constraint after the design is fixed.

If your design depends on custom dyed fabric, a unique weave, or a special fill, plan for the material minimum to influence your order quantity. A practical approach is to develop the first style around stock or near-stock materials, validate the market, and introduce custom materials on the second season when order volume supports them.

How to Structure a First Order on a Startup Budget

A 50-piece minimum can feel large when you are starting out, but the way the order is structured determines how much capital it actually ties up. The following structure is common among first-time Ginwen customers and keeps the first order manageable.

1. Start with one style rather than several, so the total commitment is 50 pieces instead of 150
2. Split the 50 pieces across three sizes that represent your core market, such as S, M, and L
3. Use two colors: one core color with a larger allocation and one accent color for testing
4. Order the sample first, at a fee of $50 to $200, which is credited against the bulk order
5. Pay the 30 percent deposit, then the 70 percent balance before shipment

This approach keeps the first order to roughly the cost of a single style at minimum quantity while still giving you a sellable size run. The sample credit, the deposit structure, and the absence of a sampling MOQ all reduce the entry barrier compared with factories that require larger first orders or charge separately for every development step.

It is worth mapping the total cash requirement before you commit. For a 50-piece down jacket order with a landed unit cost in the typical custom range, the 30 percent deposit is a modest fraction of the total, and the sample fee of $50 to $200 is credited back at the balance stage. Add freight and any duties to the FOB price when you budget, because the delivered cost is what your cash flow actually has to cover. Asking the account manager to model the delivered cost for your destination is a standard part of the quotation process and takes the guesswork out of the budget.

Startup brands often ask whether they should order one style at 50 pieces or several styles at a lower quantity each. The usual recommendation is to start with one style at the full minimum, because it lets the factory run the complete production process at standard pricing, and it gives you a single clean benchmark for quality and delivery. Once that first order confirms the relationship, a second style can be added on the following order, and the account manager can plan both styles in one production window to share setup costs.

How MOQ Compares Across Order Types

Different stages of the relationship carry different quantity expectations. Knowing the full picture prevents confusion about which minimum applies where.

The practical takeaway for a first-time buyer is that the sample stage costs very little and carries no minimum, while the first bulk order starts at 50 pieces per style. Between those two points, the account manager can walk you through exactly what your style would require and whether any flexibility applies to your specific design.

Why the MOQ Is Worth Meeting

Meeting the standard MOQ is not just about satisfying a rule. It changes what the factory can do for you in terms of pricing, capacity, and quality control.

• Better unit pricing: the 50-piece level spreads setup and material costs across enough units for reasonable pricing
• Reserved production capacity: a confirmed order at minimum quantity secures a production slot in the schedule
• Full quality inspection: bulk orders receive the complete inspection process, including AQL 2.5 sampling
• Credited sample fees: the sample fee converts into an invoice credit when the bulk order is confirmed
• Documented specifications: the approved sample and order documents create a benchmark for consistent reorders

From the factory's perspective, a 50-piece order is the smallest batch that can be run through the standard production system: material procurement, cutting, sewing, filling, inspection, and packing. Below that level, the process becomes a custom job with higher overhead per unit. The MOQ therefore marks the point where you stop paying for development-style pricing and start paying production pricing.

Common MOQ Questions from New Buyers

First-time buyers tend to ask the same questions about minimums. Here are the direct answers based on how Ginwen actually applies the MOQ for custom jackets.

1. Does the MOQ apply per color? No, the 50-piece minimum is per style, and you can mix colors and sizes within it.
2. Can I order less than 50 pieces for a trial? Possibly, for simple styles with stock materials, but the unit price will be higher; confirm with the account manager before planning.
3. Is the MOQ the same for down jackets and puffer jackets? Yes, 50 pieces per style is the standard minimum for both product lines.
4. Do samples count toward the MOQ? No, samples are separate and carry no minimum quantity.
5. Will the MOQ drop after my first order? The standard minimum stays at 50 pieces per style, but established reorder styles may allow some flexibility depending on materials.

If your first-order budget is tight, discuss it early in the conversation rather than after the design is finalized. The factory can often suggest adjustments, such as using stock fabric, simplifying the trim package, or timing the order outside peak season, that keep the total investment within reach without changing the product's core value.

How to Get a Confirmed MOQ for Your Style

A confirmed MOQ and price quotation require specific information about your product. The more complete the brief, the more accurate the quote, and the fewer surprises at order time.

1. Send the tech pack, reference images, or a detailed description of the style
2. Specify the fabric type, weight, and any performance requirements
3. State the fill specification: down or synthetic, fill power, and fill weight
4. List the hardware, trims, labels, and packaging required
5. Indicate the target size range, color count, and approximate order quantity

With this information, the account manager can confirm the MOQ for your specific style, provide the unit price at the 50-piece level, and explain any flexibility that applies. Because the MOQ and price are style-dependent, the confirmed figures on your quotation are the ones that matter, rather than any general statement about minimums.

Finally, treat the MOQ conversation as part of a longer planning relationship rather than a one-time negotiation. A factory that understands your growth plan can suggest how to sequence styles across seasons so that you always order at quantities that make economic sense for both sides. For brands that start at the 50-piece minimum and grow to regular reorders, the unit price typically improves as volume increases, which is the normal trajectory for a successful custom jacket program.